This kit is to make a
replacement control wand for a 25mm metal/plastic venetian blind
up to a maximum length of 174cm/68.5"
Does NOT fit a Wood Venetian Blind or a VERTICAL BLIND
This is not a ready made wand, but is a 5 part kit for you to assemble your own wand up to a maximum length of 1740mm/68.5"
You will receive
- 2 lengths of 7mm solid hexagonal wand at 850mm/33.5"
- 1 x replacement wand hook
- 1 x replacement wand handle
- 1 x venetian wand joiner
The lengths of wand can be cut down with a hacksaw if you require a shorter overall length. The hook, handle and joiner make up 40mm/1.5" of the overall length.
The wand is clear, 7mm wide hexagonal wand, for use with 25mm aluminium or plastic venetian blinds only. NOT compatible with wood or vertical blinds.
The hook, handle and joiner are pushed on to the wand, this is a firm push fit and no glue should be necessary, but can be used if preferred.
